Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : SFH22D3A11 | Manufacturer : sps technologies inc | Item Name: screw close tolerance |
| NSN: 5305-01-043-1879 (5305010431879) | CAGE Code: 80539 | FSC: 5305 Screws |
If you require part number SFH22D3A11 from Sps Technologies Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number SFH22D3A11 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305010431879 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part SFH22D3A11 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-043-1879 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010431879 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BM19045-3-11A | 5 | 1 | C | Z |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.211 INCHES MINIMUM AND 0.278 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.908 INCHES MINIMUM AND 0.955 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.325 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OR CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 26512-GB510N MANUFACTURERS STANDARD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions