Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : BACB30LU04-3 | Alternate P/N : BACB30LU043 | Manufacturer : sps technologies inc |
| Item Name: screw close tolerance | NSN: 5305-01-231-8937 (5305012318937) | CAGE Code: 80539 |
| FSC: 5305 Screws |
If you require part number BACB30LU04-3 from Sps Technologies Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number BACB30LU04-3 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305012318937 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part BACB30LU04-3 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-231-8937 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 012318937 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30LU04-3 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.248 INCHES MINIMUM AND 0.278 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.424 INCHES MINIMUM AND 0.474 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.190 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1105 INCHES MINIMUM AND 0.1115 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AGAV | END ITEM IDENTIFICATION | KC-46 TANKER |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| ANEE | GRIP LENGTH | 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | FAA CERTIFIED |
| MATT | MATERIAL | STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions