Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : AIC687-7D21 | Alternate P/N : AIC6877D21 | Manufacturer : sps technologies inc |
| Item Name: bolt close tolerance | NSN: 5306-01-477-5788 (5306014775788) | CAGE Code: 06725 |
| FSC: 5306 Bolts |
If you require part number AIC687-7D21 from Sps Technologies Inc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AIC687-7D21 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306014775788 and was produced under the CAGE Code 06725. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AIC687-7D21 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-477-5788 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 014775788 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AIC687-7D21 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.453 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.756 INCHES MINIMUM AND 1.776 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AASU | HEAD HEIGHT | 0.257 INCHES MINIMUM |
| AAUR | GRIP DIAMETER | 0.671 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| AAZH | HEAD MINOR DIAMETER | 0.711 INCHES MINIMUM AND 0.717 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | 0.4375 INCHES |
| ANEE | GRIP LENGTH | 1.313 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.631 INCHES MINIMUM FIRST HOLE AND 1.641 INCHES MAXIMUM FIRST HOLE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SBOLT-CLOSE TOLERANCE, SPLINE DRIVE, CRES (125 KSI FSU)DRILLED, SHORT THREAD |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions