Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 111135-06B6 | Alternate P/N : 11113506B6 | Manufacturer : sps technologies inc |
| Item Name: pin rivet | NSN: 5320-01-475-9148 (5320014759148) | CAGE Code: 80539 |
| FSC: 5320 Rivets |
If you require part number 111135-06B6 from Sps Technologies Inc which is described as a Pin Rivet component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 111135-06B6 which is listed under the Federal Supply Class 5320 Rivets. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5320014759148 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 111135-06B6 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-475-9148 Item PartTypeName: PIN-RIVET | 5320 | 014759148 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST3M861V06B6 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZF | SHANK STYLE | STUMP |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAZE | SHANK DIAMETER | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.293 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AGAV | END ITEM IDENTIFICATION | F-18 HORNET |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, RIVET, FROOVED, 100 DEG C SUNK HEAD, SHEAR, LOCKBOLT, STUMP TYPE, TITANIUM, 95 KSI |
| MATT | MATERIAL | TITANIUM OVERALL |
| ABAJ | LUBRICATION | DRY FILM OR SOLID FILM AND CETYL ALCOHOL |
| ANEE | GRIP LENGTH | 0.375 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | TPROCUREMENT SPECIFICATION NAS 621;RADIUS TO BE TANGENT TO SHANK AT 18.5 DEGREE ANGLE;DIMENTIONS BEFORE LUBRICATION;LOCKING GROOVES TO BE GROUND OR ROLLED AT MANUFACTURERES OPTION;CONICAL SURFACE OF HEAD TO SHANK WITHIN .003 TIR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions