Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : BACB30ST7-35 | Alternate P/N : BACB30ST735 | Manufacturer : sps technologies inc |
| Item Name: bolt shear | NSN: 5306-01-238-8876 (5306012388876) | CAGE Code: 80539 |
If you require part number BACB30ST7-35 from Sps Technologies Inc which is described as a Bolt Shear component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number BACB30ST7-35 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306012388876 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part BACB30ST7-35 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-238-8876 Item PartTypeName: BOLT,SHEAR | 5306 | 012388876 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30ST7-35 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.456 INCHES MINIMUM AND 0.486 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 3.051 INCHES MINIMUM AND 3.081 INCHES MAXIMUM |
| AASK | HEAD STYLE | DISHED HEXAGON |
| AASU | HEAD HEIGHT | 0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4363 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| ANEE | GRIP LENGTH | 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM FASTENER AND 40.0 ROCKWELL C MAXIMUM FASTENER |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.509 INCHES MINIMUM FIRST HOLE AND 2.569 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| FEAT | SPECIAL FEATURES | FASSEMBLY AREA EXTENDED AT THREADED END,0.402 MIN. AND 0.412 MAX. LENGTH 0.369 MIN. AND 0.372 MAX. DIAMETER ASSEMBLY CONTAINS RETAINER PAWL,MATERIAL CRES PER AMS 5643,ROCKWELL HARDNESS 35.0 MIN. AND 39.0 MAX.,FINISH BLAST PER BAC 5951,PASS |
| MATT | MATERIAL | STEEL COMP E4340 FASTENER OR STEEL COMP 4140 FASTENER OR STEEL COMP 8740 FASTENER OR STEEL COMP 8735 FASTENER OR STEEL COMP 6150 FASTENER |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions