Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : HL29NA-6-12 | Alternate P/N : HL29NA612 | Manufacturer : sps technologies inc |
| Item Name: pin rivet | NSN: 5320-01-391-3574 (5320013913574) | CAGE Code: 56878 |
If you require part number HL29NA-6-12 from Sps Technologies Inc which is described as a Pin Rivet component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HL29NA-6-12 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5320013913574 and was produced under the CAGE Code 56878. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HL29NA-6-12 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-391-3574 Item PartTypeName: PIN-RIVET | 5320 | 013913574 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3D0086-6-12 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AATB | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 1640 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| HEAT | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| FEAT | SPECIAL FEATURES | MDESIGNED FOR USE IN APPLICATION WHERE FIBERGLASS E-GLASS OR KEVLAR SOLID LAMINATE ASSEMBLIES ARE ATTACHED TO ALUMINUM SUBSTRUCTURE. RESTRICTED FROM USE IN SOLID METTALIC JOINTS OR PRIMARY LOAD CARRYING STRUCTURE. |
| AAPC | IDENTIFICATION CODE COLOR | NATURAL |
| AASB | FASTENER LENGTH | 1.065 INCHES MINIMUM AND 1.085 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| AAZE | SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.3765 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| CQSX | SHEAR STRENGTH | 2540 DOUBLE POUNDS PER SQUARE INCH |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAZF | SHANK STYLE | PIN-RIVET,STRAIGHT,THREADED |
| ABAJ | LUBRICATION | CETYL ALCOHOL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 88277-3D0086 MANUFACTURERS STANDARD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions