Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : ST3M744-10D32 | Alternate P/N : ST3M74410D32 | Manufacturer : sps technologies inc |
| Item Name: bolt close tolerance | NSN: 5306-01-132-1061 (5306011321061) | CAGE Code: 80539 |
If you require part number ST3M744-10D32 from Sps Technologies Inc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ST3M744-10D32 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306011321061 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ST3M744-10D32 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-132-1061 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 011321061 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10115879 | 2 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.523 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.533 INCHES MINIMUM AND 2.553 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AASU | HEAD HEIGHT | 0.350 INCHES NOMINAL |
| AATB | WIDTH BETWEEN FLATS | 0.970 INCHES MINIMUM AND 0.978 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| ANEE | GRIP LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.408 INCHES MINIMUM AND 2.438 INCHES MAXIMUM ALL HOLES |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions