Part No. : 1701-4-10 | Alternate P/N : 1701410 | Manufacturer : sps technologies ltd |
Item Name: screw close tolerance | NSN: 5305-01-333-9887 (5305013339887) | CAGE Code: 06725 |
If you require part number 1701-4-10 from Sps Technologies Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 1701-4-10 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013339887 and was produced under the CAGE Code 06725. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 1701-4-10 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 1701-4-10
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-333-9887 Item Description: Screw Close Tolerance | 5305 | 013339887 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
1701-4-10 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.403 INCHES NOMINAL |
AASB | FASTENER LENGTH | 1.013 INCHES MINIMUM AND 1.043 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 28 |
CQBC | MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH |
CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
CRSQ | COUNTERSINK ANGLE | 129.0 DEGREES MINIMUM AND 131.0 DEGREES MAXIMUM |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
AASL | HEAD DIAMETER | 0.4421 INCHES MINIMUM AND 0.5260 INCHES MAXIMUM |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload