Part No. : PPF1355V3-5H | Alternate P/N : PPF1355V35H | Manufacturer : sps technologies ltd |
Item Name: screw close tolerance | NSN: 5305-01-199-2224 (5305011992224) | CAGE Code: 27624 |
FSC: 5305 Screws |
If you require part number PPF1355V3-5H from Sps Technologies Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number PPF1355V3-5H which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305011992224 and was produced under the CAGE Code 27624. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part PPF1355V3-5H today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. PPF1355V3-5H
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-199-2224 Item Description: Screw Close Tolerance | 5305 | 011992224 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ppf1355v3-5h | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
AASK | HEAD STYLE | PAN NO. 2 |
AASL | HEAD DIAMETER | 0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
AAUB | HOLE DIAMETER | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
ASXK | HOLE QUANTITY | 1 |
BQDM | HOLE TYPE | DRILLED |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
CRHC | HOLE CONFIGURATION STYLE | ROUND |
CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
FEAT | SPECIAL FEATURES | INTERNAL DRIVE RIBBED |
MATT | MATERIAL | TITANIUM ALLOY OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4967 COMP 6AL4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload