Part No. : AIC-4411-3A16 | Alternate P/N : AIC44113A16 | Manufacturer : sps technologies ltd |
Item Name: screw close tolerance | NSN: 5305-01-352-1154 (5305013521154) | CAGE Code: 06725 |
FSC: 5305 Screws |
If you require part number AIC-4411-3A16 from Sps Technologies Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AIC-4411-3A16 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013521154 and was produced under the CAGE Code 06725. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AIC-4411-3A16 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. AIC-4411-3A16
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-352-1154 Item Description: Screw Close Tolerance | 5305 | 013521154 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Aic-4411-3a16 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.345 INCHES NOMINAL |
AASB | FASTENER LENGTH | 1.330 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
ANEE | GRIP LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS4006 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
AASL | HEAD DIAMETER | 0.311 INCHES MINIMUM AND 0.357 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload