Part No. : 93926-3-6 | Alternate P/N : 9392636 | Manufacturer : sps technologies ltd |
Item Name: screw close tolerance | NSN: 5305-01-396-5208 (5305013965208) | CAGE Code: 80539 |
FSC: 5305 Screws |
If you require part number 93926-3-6 from Sps Technologies Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 93926-3-6 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013965208 and was produced under the CAGE Code 80539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 93926-3-6 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 93926-3-6
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-396-5208 Item Description: Screw Close Tolerance | 5305 | 013965208 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
93926-3-6 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AHYM | Nominal Thread Diameter | 0.190 INCHES |
ANEE | Grip Length | 0.375 INCHES NOMINAL |
AASK | Head Style | FLAT COUNTERSUNK |
SFTT | Surface Treatment | CADMIUM OVERALL |
MATT | Material | STEEL COMP H11 OVERALL |
AASL | Head Diameter | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
AASB | Fastener Length | 0.723 INCHES MINIMUM AND 0.753 INCHES MAXIMUM |
AASA | Thread Length | 0.363 INCHES NOMINAL |
ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
THSD | Thread Series Designator | UNJF |
AAJF | Thread Direction | RIGHT-HAND |
AAUR | Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 32 |
MRC | Decoded Requirement | Clear Text Reply |
AAJD | Thread Class | 3A |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload