Part No. : PBBF1202-7-28D | Alternate P/N : PBBF1202728D | Manufacturer : sps technologies ltd |
Item Name: screw close tolerance | NSN: 5305-01-475-1148 (5305014751148) | CAGE Code: 27624 |
FSC: 5305 Screws |
If you require part number PBBF1202-7-28D from Sps Technologies Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number PBBF1202-7-28D which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014751148 and was produced under the CAGE Code 27624. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part PBBF1202-7-28D today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. PBBF1202-7-28D
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-475-1148 Item Description: Screw Close Tolerance | 5305 | 014751148 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Pbbf1202-7-28d | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.594 INCHES NOMINAL |
AASB | FASTENER LENGTH | 1.172 INCHES MINIMUM AND 1.219 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.8884 INCHES NOMINAL |
AAUB | HOLE DIAMETER | 0.101 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED |
AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
ANEE | GRIP LENGTH | 0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM |
ASXK | HOLE QUANTITY | 1 |
BQDM | HOLE TYPE | DRILLED |
CMLP | THREAD QUANTITY PER INCH | 20 |
CRHC | HOLE CONFIGURATION STYLE | ROUND PERPENDICULAR |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES HEAD |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE |
MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload