Part No. : HT2040-7-22D | Alternate P/N : HT2040722D | Manufacturer : sps technologies ltd |
Item Name: screw close tolerance | NSN: 5305-01-496-9216 (5305014969216) | CAGE Code: K5673 |
FSC: 5305 Screws |
If you require part number HT2040-7-22D from Sps Technologies Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HT2040-7-22D which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014969216 and was produced under the CAGE Code K5673. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HT2040-7-22D today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. HT2040-7-22D
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-496-9216 Item Description: Screw Close Tolerance | 5305 | 014969216 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ht2040-7-22d | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.656 INCHES NOMINAL |
AASB | FASTENER LENGTH | 2.015 INCHES MINIMUM AND 2.062 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
AASL | HEAD DIAMETER | 0.881 INCHES MINIMUM AND 0.888 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.130 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.436 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AGAV | III END ITEM IDENTIFICATION | CBIL FOR C/D/ |
AHYM | NOMINAL THREAD DIAMETER | 0.438 INCHES |
ANEE | GRIP LENGTH | 1.375 INCHES NOMINAL |
CMLP | THREAD QUANTITY PER INCH | 20 |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629,COMP XM-13 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload