Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : IRD67333J | Manufacturer : st microelectronics ltd | Item Name: capacitor fixed metallized paper |
| NSN: 5910-01-333-2143 (5910013332143) | CAGE Code: 57962 | FSC: 5910 Capacitors |
If you require part number IRD67333J from St Microelectronics Ltd which is described as a Capacitor Fixed Metallized Paper component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number IRD67333J which is listed under the Federal Supply Class 5910 Capacitors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5910013332143 and was produced under the CAGE Code 57962. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part IRD67333J today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-01-333-2143 Item PartTypeName: CAPACITOR,FIXED,METALLIZED,PAPER | 5910 | 013332143 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 715276 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AGAV | END ITEM IDENTIFICATION | 6625-01-196-8335 TEST SET,ELECTR |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 1000.0 MEGOHMS |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.033 MICROFARADS SINGLE SECTION |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 63.0 DC SINGLE SECTION |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -5.0 TO 5.0 SINGLE SECTION |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS |
| CWSS | DIELECTRIC MATERIAL | PLASTIC POLYESTER |
| ADAT | BODY WIDTH | 0.256 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL S) ON ONE SURFACE |
| ABJT | TERMINAL LENGTH | 0.236 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.295 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.098 INCHES MAXIMUM |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.200 INCHES NOMINAL |
| AEBT | TERMINAL DIAMETER | 0.020 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE S) |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 100.0 DEG CELSIUS MAXIMUM |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| CWJK | CASE MATERIAL | PLASTIC |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 8.000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions