Part No. : SK-534 | Alternate P/N : SK534 | Manufacturer : stephens adamson inc |
Item Name: bearing ball annular | NSN: 3110-01-036-9828 (3110010369828) | CAGE Code: 57448 |
FSC: 3110 Bearings Antifriction Unmounted |
If you require part number SK-534 from Stephens Adamson Inc which is described as a Bearing Ball Annular component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number SK-534 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110010369828 and was produced under the CAGE Code 57448. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part SK-534 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. SK-534
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-036-9828 Item Description: Bearing Ball Annular | 3110 | 010369828 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Sk-534 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABXV | BORE DIAMETER | 2.9375 INCHES MINIMUM AND 2.9381 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 5.5108 INCHES MINIMUM AND 5.5118 INCHES MAXIMUM |
AGVT | OUTER RING WIDTH | 1.6825 INCHES MINIMUM AND 1.6875 INCHES MAXIMUM |
AGVU | INNER RING WIDTH | 3.8700 INCHES MINIMUM AND 3.8750 INCHES MAXIMUM |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | PRESSED |
AGYJ | SEAL QUANTITY | 2 |
AGYW | BEARING SEAL TYPE | CONTACT |
AGZC | LOAD DIRECTION | RADIAL |
AGZD | BORE SHAPE | STRAIGHT |
FEAT | SPECIAL FEATURES | TRIPLE LIP SEALS,LUBE HOLE AND LOCKING PIN HOLE IN OUTER RING,TWO 1/2-20 THD SETSCREW HOLES 120 DEG APART IN EACH END OF INNER RING LOCATED 9/16 IN. FROM FACE OF INNER RING |
LBMA | LUBRICATION MATERIAL | LUBRICANT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload