Part No. : 7778-30 | Alternate P/N : 777830 | Manufacturer : stinar corporation |
Item Name: shaft shouldered | NSN: 3040-01-149-0241 (3040011490241) | CAGE Code: 32526 |
FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 7778-30 from Stinar Corporation which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 7778-30 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040011490241 and was produced under the CAGE Code 32526. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 7778-30 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 7778-30
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-01-149-0241 Item Description: Shaft Shouldered | 3040 | 011490241 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
7778-30 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | CROSS DRILLED HOLE AND SLOTTED |
AAHN | END SIMILARITY | NOT IDENTICAL |
AAHP | SECOND END STYLE | TWO CROSS DRILLED HOLES |
ABHP | OVERALL LENGTH | 16.125 INCHES NOMINAL |
AGAV | END ITEM IDENTIFICATION | 1730011152927 |
AMDL | FIRST END DIAMETER | 0.6250 INCHES NOMINAL |
AMDX | FIRST END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 1.000 INCHES NOMINAL |
AMFZ | SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
AMGS | SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
AMGS | SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL |
AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
AMHZ | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
ATPC | STEP QUANTITY | 3 |
CSPY | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL |
FEAT | SPECIAL FEATURES | FIRST END CHAMFERED .125 X 30 DEG; SECOND END CHAMFERED .063 X 45 DEG; ONE HOLE IN BODY 1.5 IN. FROM FIRST END,.188 DIA |
MATT | MATERIAL | STEEL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload