Part No. : 200711997 | Manufacturer : stinar corporation | Item Name: pin quick release |
NSN: 5315-01-605-0455 (5315016050455) | CAGE Code: 32526 | FSC: 5315 Nails Machine Keys and Pins |
If you require part number 200711997 from Stinar Corporation which is described as a Pin Quick Release component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 200711997 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315016050455 and was produced under the CAGE Code 32526. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 200711997 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 200711997
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5315-01-605-0455 Item Description: Pin Quick Release | 5315 | 016050455 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
200711997 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
APCM | Actuation Type | PULL AND PUSH |
STYL | Style Designator | RING HANDLE |
MATT | Material | STEEL CORROSION RESISTING HANDLE |
ABRM | Detent Quantity | 1 |
FEAT | Special Features | HAS 1-1/4 INCH LONG X 1/2 INCH WIDE STAINLESS STEEL TAB ATTACHED TO LANYARD WHICH ALSO HAS A 0.203 INCH DIAMETER MOUNTING HOLE CENTERED ON ANGLED POSITION |
AFLW | Actuation Method | HANDLE |
AGAV | End Item Identification | ENG MAINT STAND |
CQSX | Shear Strength | 19560 SINGLE POUND |
ANEE | Grip Length | 2.50 INCHES MINIMUM AND 2.56 INCHES MAXIMUM |
CTDJ | Pin Attachment Type | RING AND CABLE LANYARD W/TERMINATIONS |
ACHS | Lanyard Length | 6.000 INCHES NOMINAL |
AAZE | Shank Diameter | 0.497 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
MRC | Decoded Requirement | Clear Text Reply |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload