Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 11Y-1-YS-0-03 | Alternate P/N : 11Y1YS003 | Manufacturer : strike weapons and unmanned aviation |
| Item Name: motor hydraulic | NSN: 4320-01-202-5750 (4320012025750) | CAGE Code: 58905 |
If you require part number 11Y-1-YS-0-03 from Strike Weapons And Unmanned Aviation which is described as a Motor Hydraulic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 11Y-1-YS-0-03 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4320012025750 and was produced under the CAGE Code 58905. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 11Y-1-YS-0-03 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAST | Key Length | 1.000 INCHES NOMINAL |
| AJAB | Drive Shaft Type | KEYED |
| AAPL | Torque Load Rating | 881.0 INCH-POUNDS OR 1141.0 INCH-POUNDS |
| AWLS | Connection Type | INLET AND OUTLET |
| AFFL | Mounting Bolt Circle Diameter | 3.250 INCHES NOMINAL |
| ABTJ | Mounting Hole Quantity | 4 |
| ABWV | Shaft Diameter | 1.000 INCHES NOMINAL |
| ABSF | Key Width | 0.250 INCHES NOMINAL |
| AJLF | Housing Material | IRON |
| AEQC | Operating Speed At Rated Capacity In Rpm | 945 |
| AKCT | Shaft Rotation Direction | CLOCKWISE AND COUNTERCLOCKWISE |
| ARQA | Shaft Protrusion Length | 1.254 INCHES NOMINAL |
| AAXX | Mounting Type | FLANGE |
| MRC | Decoded Requirement | Clear Text Reply |
| AXFE | Key Height | 0.125 INCHES NOMINAL |
| AXFP | Displacement Type | CONSTANT |
| AXFB | Maximum Working Pressure Rating At Specified Temp Range | 1750PSI CONT OPER,2250PSI INTERMITTENT OPER |
| AXFQ | Constant Displacement Per Revolution | 3.600 CUBIC INCHES |
| ABTB | Mounting Hole Diameter | 0.375 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions