Part No. : JCM-10993-001 | Alternate P/N : JCM10993001 | Manufacturer : strike weapons and unmanned aviation |
Item Name: clamp block | NSN: 5340-01-312-6774 (5340013126774) | CAGE Code: 58905 |
FSC: 5340 Hardware Commercial |
If you require part number JCM-10993-001 from Strike Weapons And Unmanned Aviation which is described as a Clamp Block component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number JCM-10993-001 which is listed under the Federal Supply Class 5340 Hardware Commercial. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5340013126774 and was produced under the CAGE Code 58905. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part JCM-10993-001 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. JCM-10993-001
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-312-6774 Item Description: Clamp Block | 5340 | 013126774 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Jcm-10993-001 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 2.000 INCHES NOMINAL |
ABKW | OVERALL HEIGHT | 1.500 INCHES NOMINAL |
ABMK | OVERALL WIDTH | 1.064 INCHES NOMINAL |
ABTB | MOUNTING HOLE DIAMETER | 0.438 INCHES NOMINAL |
ABTJ | MOUNTING HOLE QUANTITY | 2 |
AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.532 INCHES NOMINAL |
AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.500 INCHES NOMINAL |
AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
BYGG | BLOCK HEIGHT | 0.750 INCHES NOMINAL |
CWWM | CLAMPING HOLE DIAMETER | 0.422 INCHES NOMINAL FIRST HOLE |
CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 1.000 INCHES NOMINAL |
MATT | MATERIAL | STEEL |
STYL | STYLE DESIGNATOR | RECTANGULAR |
CWTD | CLAMPING HOLE QUANTITY | 1 |
CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.250 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload