Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 9M702-2B28 | Alternate P/N : 9M7022B28 | Manufacturer : swan industries inc |
| Item Name: clamp block section | NSN: 5340-01-526-3866 (5340015263866) | CAGE Code: 54112 |
| FSC: 5340 Hardware Commercial |
If you require part number 9M702-2B28 from Swan Industries Inc which is described as a Clamp Block Section component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 9M702-2B28 which is listed under the Federal Supply Class 5340 Hardware Commercial. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5340015263866 and was produced under the CAGE Code 54112. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 9M702-2B28 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-526-3866 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 015263866 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9M702-2B28 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.394 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AGAV | END ITEM IDENTIFICATION | F/A-18 E/F |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CWWM | CLAMPING HOLE DIAMETER | 0.490 INCHES NOMINAL FIRST HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.490 INCHES NOMINAL SECOND HOLE |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.625 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.686 INCHES NOMINAL |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 1.998 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2 |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| ABHP | OVERALL LENGTH | 2.562 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.205 INCHES NOMINAL |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.197 INCHES NOMINAL |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.312 INCHES NOMINAL |
| BYGG | BLOCK HEIGHT | 0.394 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 4 |
| CWWM | CLAMPING HOLE DIAMETER | 0.490 INCHES NOMINAL FOURTH HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.490 INCHES NOMINAL THIRD HOLE |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.282 INCHES NOMINAL |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 1.311 INCHES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY) CLAMP, BLOCK - TUBE SUPPORT, PLASTIC |
| MATT | MATERIAL | PLASTIC |
| SUPP | SUPPLEMENTARY FEATURES | A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM) |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions