Part No. : TP51959-12 | Alternate P/N : TP5195912 | Manufacturer : teledyne technologies incorporated |
Item Name: screw machine | NSN: 5305-00-777-6039 (5305007776039) | CAGE Code: 98571 |
FSC: 5305 Screws |
If you require part number TP51959-12 from Teledyne Technologies Incorporated which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TP51959-12 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305007776039 and was produced under the CAGE Code 98571. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TP51959-12 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. TP51959-12
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-777-6039 Item Description: Screw Machine | 5305 | 007776039 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Tp51959-12 | 1 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
AASL | HEAD DIAMETER | 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.038 INCHES MINIMUM AND 0.047 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
THSD | THREAD SERIES DESIGNATOR | UNC |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 40 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload