Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 02M0802-0418 | Alternate P/N : 02M08020418 | Manufacturer : teleflex inc |
| Item Name: hose assembly nonmetallic | NSN: 4720-01-544-7255 (4720015447255) | CAGE Code: 3F787 |
| FSC: 4720 Hose and Tubing Flexible |
If you require part number 02M0802-0418 from Teleflex Inc which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 02M0802-0418 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720015447255 and was produced under the CAGE Code 3F787. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 02M0802-0418 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-544-7255 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 015447255 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 02M0802-0418 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.656 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES" |
| AGAV | END ITEM IDENTIFICATION | FORCE SYSTEM, REFUELER" |
| AHNC | CONNECTION STYLE | FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 41.500 INCHES NOMINAL OVERALL" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | ASSEMBLY, HOSE FUEL PIPING ((STATIC DISSIPATING)" |
| FEAT | SPECIAL FEATURES | LOCATION OF HOSE ASSY: PUMP INLET TO TEE UNDER AIR ELIMINATOR; HOSE HAS STAINLESS STEEL, FEMALE JIC FITTINGS ON BOTH ENDS." |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.656 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES" |
| AGAV | END ITEM IDENTIFICATION | FORCE SYSTEM, REFUELER" |
| AHNC | CONNECTION STYLE | FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 41.500 INCHES NOMINAL OVERALL" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | ASSEMBLY, HOSE FUEL PIPING ((STATIC DISSIPATING)" |
| FEAT | SPECIAL FEATURES | LOCATION OF HOSE ASSY: PUMP INLET TO TEE UNDER AIR ELIMINATOR; HOSE HAS STAINLESS STEEL, FEMALE JIC FITTINGS ON BOTH ENDS." |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions