Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 83060 | Manufacturer : tenneco inc | Item Name: mount resilient weapon system |
| NSN: 5342-00-404-7446 (5342004047446) | CAGE Code: 27387 | FSC: 5342 Hardware Weapon System |
If you require part number 83060 from Tenneco Inc which is described as a Mount Resilient Weapon System component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 83060 which is listed under the Federal Supply Class 5342 Hardware Weapon System. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5342004047446 and was produced under the CAGE Code 27387. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 83060 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5342-00-404-7446 Item PartTypeName: MOUNT,RESILIENT,WEAPON SYSTEM | 5342 | 004047446 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5340004047446 | 6 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASF | NONMETALLIC HARDNESS RATING | 40.0 MINIMUM SHORE DUROMETER A AND 50.0 MAXIMUM SHORE DUROMETER A |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL STUD |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM STUD |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STUD |
| TEST | TEST DATA DOCUMENT | 19207-7971287 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions