Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : SN7404N | Manufacturer : texas instruments inc | Item Name: microcircuit digital |
| NSN: 5962-01-067-1156 (5962010671156) | CAGE Code: 01295 | FSC: 5962 Microcircuits Electronic |
If you require part number SN7404N from Texas Instruments Inc which is described as a Microcircuit Digital component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number SN7404N which is listed under the Federal Supply Class 5962 Microcircuits Electronic. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5962010671156 and was produced under the CAGE Code 01295. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part SN7404N today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-067-1156 Item PartTypeName: MICROCIRCUIT,DIGITAL | 5962 | 010671156 | N | B | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| B | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 640-200067-001 | B | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 240.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | 0.0 TO 70.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0 TO 150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | RADAR SET TYPE AN/FPS-115 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND MEDIUM POWER AND MEDIUM SPEED AND W/TOTEM POLE OUTPUT |
| CQSJ | INCLOSURE MATERIAL | PLASTIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | HEX 1 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | 6 INVERTER,DIGITAL |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | T0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.5 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 22.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,LOW TO HIGH LEVEL OUTPUT AND 15.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,HIGH TO LOW LEVEL OUTPUT |
| TEST | TEST DATA DOCUMENT | 04761-640-200067 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
| TTQY | TERMINAL TYPE AND QUANTITY | 14 PRINTED CIRCUIT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions