Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : BACB30JC8-14 | Alternate P/N : BACB30JC814 | Manufacturer : the boeing company |
| Item Name: screw close tolerance | NSN: 5305-00-933-7291 (5305009337291) | CAGE Code: 77272 |
If you require part number BACB30JC8-14 from The Boeing Company which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number BACB30JC8-14 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009337291 and was produced under the CAGE Code 77272. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part BACB30JC8-14 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-933-7291 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 009337291 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HL21PB8-14 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.380 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.260 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.464 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| FEAT | SPECIAL FEATURES | DRILLED HOLE THD END 0.122 TO 0.142 IN. DIA,0.200 IN. DEEP |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions