21104-01 by Thomson Training And Simulation Inc With NSN 3120-01-332-8033

Part No. : 21104-01	Alternate P/N : 2110401	Manufacturer : thomson training and simulation inc
Item Name: bushing sleeve	NSN: 3120-01-332-8033 (3120013328033)	CAGE Code: 82932
FSC: 3120 Bearings Plain Unmounted

If you require part number 21104-01 from Thomson Training And Simulation Inc which is described as a Bushing Sleeve component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 21104-01 which is listed under the Federal Supply Class 3120 Bearings Plain Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3120013328033 and was produced under the CAGE Code 82932. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 21104-01 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for 21104-01

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 21104-01 with NSN 3120-01-332-8033, 3120-01-332-8033

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-332-8033 Item PartTypeName: BUSHING,SLEEVE	3120	013328033	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
21104-01	5	2	3

Characteristics Data of NSN 3120-01-332-8033, 3120013328033

MRC	Criteria	Characteristic
ADAS	BODY INSIDE DIAMETER	1.2600 INCHES MINIMUM AND 1.2700 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.2500 INCHES NOMINAL
AGKH	LUBRICANT ACCOMMODATION STYLE	GROOVED CIRCULAR
BZLX	CORNER SHAPE	ROUND LEFT FLANGE BODY CORNER
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
FEAT	SPECIAL FEATURES	ID REDUCED 1.2588 IN. MIN,1.2598 IN. MAX DIA,2 PLACES
MATT	MATERIAL	STEEL COMP 303 OVERALL
ABGD	SLOT LENGTH	0.0670 INCHES NOMINAL FIRST
ABHP	OVERALL LENGTH	2.0000 INCHES NOMINAL
ADAR	BODY OUTSIDE DIAMETER	1.9360 INCHES MINIMUM AND 1.9370 INCHES MAXIMUM
AEPR	FLANGE OUTSIDE DIAMETER	3.0000 INCHES NOMINAL
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER
BZLX	CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
AAUB	HOLE DIAMETER	0.3430 INCHES NOMINAL FIRST
ABGC	SLOT WIDTH	0.2500 INCHES MINIMUM FIRST AND 0.2530 INCHES MAXIMUM FIRST
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CSYM	SURFACE FINISH	32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
CTJM	ANTIROTATION/LUBRICATION TYPE AND QUANTITY	3 HOLE AND 1 SLOT
CTMQ	SURFACE GROOVE LOCATION AND QUANTITY	2 INTERNAL
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END

Related NSN Componets for 21104-01

211-0-001 REV C ITEM NO.15	211-0-001 REV C ITEM NO.16	211-0-001 REV C ITEM NO.17	211-0-001 REV C ITEM NO-3
211-0-001 REV C ITEM NO.4	211-0-001 REV C ITEM NO.48	211-0-001 REV C ITEM NO.49	211-0-001 REV C ITEM NO.5
211-0-001 REV C ITEM NO.54	211-0-001 REV C ITEM NO.56	211-0-001 REV C ITEM NO-57	211-0-001 REV C ITEM NO-58
211-0-001 REV C ITEM NO.6	211-0-001 REV C ITEM NO.71	211-0-001 REV C ITEM NO-72	211-0-001 REV C ITEM NO.73
211-0-001 REV C ITEM NO.8	211-0-005 REV - ITEM NO.15	211-0-010	211-0-010 REV B ITEM NO.10
211-0-010 REV B ITEM NO 11	211-0-010 REV B ITEM NO-12	211-0-010 REV B ITEM NO.14	211-0-010 REV B ITEM NO-15
211-0-010 REV B ITEM NO-5	211-0-010 REV B ITEM NO 6	211-0-010 REV B ITEM NO 8	211-0-010 REV B ITEM NO M13
211-00	211-000-008	211-00002-00	211-00004-00
211-0001-00	211-0001-001	211-0001-004	211-0001-571