Part No. : M9105WI3MBRDUE8522 | Manufacturer : timken company | Item Name: bearing ball duplex |
NSN: 3110-00-848-5004 (3110008485004) | CAGE Code: 21335 | FSC: 3110 Bearings Antifriction Unmounted |
If you require part number M9105WI3MBRDUE8522 from Timken Company which is described as a Bearing Ball Duplex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number M9105WI3MBRDUE8522 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110008485004 and was produced under the CAGE Code 21335. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part M9105WI3MBRDUE8522 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. M9105WI3MBRDUE8522
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.9249 INCHES MINIMUM AND 0.9449 INCHES MAXIMUM |
ABXV | BORE DIAMETER | 0.9841 INCHES MINIMUM AND 0.9843 INCHES MAXIMUM |
ADGA | OVERALL OUTSIDE DIAMETER | 1.8501 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM |
ADZG | LUBRICATION MATERIAL | OIL |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | MACHINED |
AGZC | LOAD DIRECTION | ANGULAR |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
CTHQ | BEARING PRELOAD RATING | 20.0 POUNDS NOMINAL |
FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION AT M 65 TO P 300 DEG F |
MATT | MATERIAL | COPPER ALLOY RETAINER |
MATT | MATERIAL | STEEL BALL |
MATT | MATERIAL | STEEL OUTER RING |
AKVV | INTERNAL CLEARANCE | 0.0010 INCHES MINIMUM RADIAL AND 0.0015 INCHES MAXIMUM RADIAL |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-7808 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | STEEL INNER RING |
STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload