Part No. : AAM9122-44-101 | Alternate P/N : AAM912244101 | Manufacturer : timken company |
Item Name: bearing ball annular | NSN: 3110-01-094-4412 (3110010944412) | CAGE Code: 21335 |
FSC: 3110 Bearings Antifriction Unmounted |
If you require part number AAM9122-44-101 from Timken Company which is described as a Bearing Ball Annular component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AAM9122-44-101 which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110010944412 and was produced under the CAGE Code 21335. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AAM9122-44-101 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. AAM9122-44-101
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-01-094-4412 Item Description: Bearing Ball Annular | 3110 | 010944412 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Aam9122-44-101 | 1 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 25.0 MILLIMETERS NOMINAL |
ABXV | BORE DIAMETER | 110.0 MILLIMETERS NOMINAL |
ADGA | OVERALL OUTSIDE DIAMETER | 170.0 MILLIMETERS NOMINAL |
AGAV | END ITEM IDENTIFICATION | AH-1 SERIES HELICOPTERS |
AGYE | SURFACE FINISH | GROUND |
AGYF | RETAINER FABRICATION METHOD | MACHINED |
AGZC | LOAD DIRECTION | RADIAL |
AGZD | BORE SHAPE | STANDARD TAPER |
AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
AKVV | INTERNAL CLEARANCE | 0.0160 INCHES MINIMUM RADIAL AND 0.0123 INCHES MAXIMUM RADIAL |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
CTHY | CONTACT ANGLE | 25.0 DEGREES MINIMUM |
LBMA | LUBRICATION MATERIAL | OIL LUBRICATING OR GREASE |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-7808 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-G-25537 MIL SPEC 2ND MATERIAL RESPONSE |
MATT | MATERIAL | STEEL COMP M50 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload