Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : NA938-932D | Alternate P/N : NA938932D | Manufacturer : timken corporation |
| Item Name: bearing roller tapered | NSN: 3110-00-120-1629 (3110001201629) | CAGE Code: 60038 |
| FSC: 3110 Bearings Antifriction Unmounted |
If you require part number NA938-932D from Timken Corporation which is described as a Bearing Roller Tapered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NA938-932D which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110001201629 and was produced under the CAGE Code 60038. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NA938-932D today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-120-1629 Item PartTypeName: BEARING,ROLLER,TAPERED | 3110 | 001201629 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS19088-15 | 2 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 5.6250 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 4.5000 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 8.3750 INCHES NOMINAL |
| AGWU | BACKFACE CORNER RADIUS | 0.0620 INCHES NOMINAL |
| AGWV | STANDOUT WIDTH | 0.5000 INCHES NOMINAL |
| AGWW | CONE CORNER RADIUS | 0.1400 INCHES NOMINAL |
| AGWY | CUP WIDTH | 4.6250 INCHES NOMINAL |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA CLASS 4 |
| FEAT | SPECIAL FEATURES | OPERATING TEMPERATURE NOT TO EXCEED 121 DEG C/250 DEG F OIL HOLE AND GROOVE IN CUP |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | STRAIGHT BORE,DOUBLE CUP,SINGLE CONES,NON-ADJUSTABLE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions