Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : RCJ1 | Manufacturer : timken corporation | Item Name: bearing unit ball |
| NSN: 3130-01-266-2615 (3130012662615) | CAGE Code: 21335 | FSC: 3130 Bearings Mounted |
If you require part number RCJ1 from Timken Corporation which is described as a Bearing Unit Ball component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number RCJ1 which is listed under the Federal Supply Class 3130 Bearings Mounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130012662615 and was produced under the CAGE Code 21335. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part RCJ1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-266-2615 Item PartTypeName: BEARING UNIT,BALL | 3130 | 012662615 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 309-1231-010 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | FLANGE THICKNESS | 0.562 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.0000 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM |
| AFWD | HOUSING LENGTH | 1.312 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 3.750 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.422 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| CXCX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG SIDE OF A SQUARE | 2.750 INCHES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COLLAR |
| MATT | MATERIAL | STEEL COMP E52100 BEARING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING |
| STYL | STYLE DESIGNATOR | FLANGE BLOCK |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions