Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 97764 | Manufacturer : triumph engine control systems llc | Item Name: bearing sleeve |
| NSN: 3120-00-185-0143 (3120001850143) | CAGE Code: 11599 | FSC: 3120 Bearings Plain Unmounted |
If you require part number 97764 from Triumph Engine Control Systems Llc which is described as a Bearing Sleeve component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 97764 which is listed under the Federal Supply Class 3120 Bearings Plain Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3120001850143 and was produced under the CAGE Code 11599. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 97764 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-00-185-0143 Item PartTypeName: BEARING,SLEEVE | 3120 | 001850143 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 97764 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.4359 INCHES MINIMUM AND 1.4362 INCHES MAXIMUM |
| ADAR | BODY OUTSIDE DIAMETER | 0.8800 INCHES NOMINAL |
| ADAS | BODY INSIDE DIAMETER | 0.6908 INCHES MINIMUM AND 0.6913 INCHES MAXIMUM |
| AGFQ | LEFT FLANGE OUTSIDE DIAMETER | 1.4988 INCHES MINIMUM AND 1.4991 INCHES MAXIMUM |
| AGFR | RIGHT FLANGE OUTSIDE DIAMETER | 1.4988 INCHES MINIMUM AND 1.4991 INCHES MAXIMUM |
| AGFS | LEFT FLANGE WIDTH | 0.3000 INCHES NOMINAL |
| AGFT | RIGHT FLANGE WIDTH | 0.3000 INCHES NOMINAL |
| AGKH | LUBRICANT ACCOMMODATION STYLE | GROOVED OPEN ONE END |
| CTMQ | SURFACE GROOVE LOCATION AND QUANTITY | 1 INTERNAL |
| FEAT | SPECIAL FEATURES | OD,FLAT ON BOTH FLANGES 0.0630 IN. MIN,0.0670 IN. MAX,FROM CENTER LINE TO FLAT |
| MATT | MATERIAL | COPPER ALLOY OVERALL |
| STYL | STYLE DESIGNATOR | SOLID,EXTERNAL FLANGES BOTH ENDS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions