Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : ANSI UL514D | Alternate P/N : ANSIUL514D | Manufacturer : underwriters laboratories inc |
| Item Name: bend electrical conduit | NSN: 5975-00-152-1105 (5975001521105) | CAGE Code: 81345 |
| FSC: 5975 Electrical Hardware and Supplies |
If you require part number ANSI UL514D from Underwriters Laboratories Inc which is described as a Bend Electrical Conduit component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ANSI UL514D which is listed under the Federal Supply Class 5975 Electrical Hardware and Supplies. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5975001521105 and was produced under the CAGE Code 81345. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ANSI UL514D today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-00-152-1105 Item PartTypeName: BEND,ELECTRICAL CONDUIT | 5975 | 001521105 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ANSI UL514D | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.824 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.790 INCHES MINIMUM 2ND END |
| AASA | THREAD LENGTH | 0.790 INCHES NOMINAL 1ST END |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | FLAME RESISTANT |
| ABHK | TRADE SIZE | 0.750 |
| ABKV | OUTSIDE DIAMETER | 1.050 INCHES NOMINAL |
| ACSX | OFFSET DISTANCE | 7.250 INCHES NOMINAL |
| AGSJ | BEND RADIUS | 4.500 INCHES NOMINAL |
| ALXF | STRUCTURAL DESIGN | THICKWALL |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES BOTH ENDS |
| CRMM | TANGENT LENGTH | 1.500 INCHES NOMINAL |
| CSKG | BEND ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | ZINC OVERALL |
| STYL | STYLE DESIGNATOR | ANGULAR |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3/4 SIZE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions