Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : GRC2418A204 | Manufacturer : united technologies corporation | Item Name: generator engine accessory |
| NSN: 2920-00-605-0736 (2920006050736) | CAGE Code: 24956 |
If you require part number GRC2418A204 from United Technologies Corporation which is described as a Generator Engine Accessory component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number GRC2418A204 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920006050736 and was produced under the CAGE Code 24956. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part GRC2418A204 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-605-0736 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 006050736 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8H1957 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.781 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 3.247 INCHES MINIMUM AND 3.249 INCHES MAXIMUM |
| ABGC | SLOT WIDTH | 0.656 INCHES NOMINAL |
| ABGD | SLOT LENGTH | 1.219 INCHES NOMINAL |
| ABPR | FIRST STEP DIAMETER | 0.750 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 1.250 INCHES NOMINAL |
| ADER | MOUNTING STYLE | FLANGE MTD W/TWO MTG SLOTS AND ONE MTG HOLE |
| ADPY | PILOT HEIGHT | 0.844 INCHES NOMINAL |
| AGAW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING SLOTS | 3.625 INCHES NOMINAL |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | 0.500 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1350 |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.484 INCHES NOMINAL |
| BCMJ | CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | 5.875 INCHES NOMINAL |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions