Part No. : VCG0001-12D43 | Alternate P/N : VCG000112D43 | Manufacturer : valley todeco inc |
Item Name: bolt close tolerance | NSN: 5306-01-136-4485 (5306011364485) | CAGE Code: 06710 |
FSC: 5306 Bolts |
If you require part number VCG0001-12D43 from Valley Todeco Inc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number VCG0001-12D43 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306011364485 and was produced under the CAGE Code 06710. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part VCG0001-12D43 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. VCG0001-12D43
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-01-136-4485 Item Description: Bolt Close Tolerance | 5306 | 011364485 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Vcg0001-12d43 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.552 INCHES MINIMUM AND 0.592 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 3.250 INCHES MINIMUM AND 3.270 INCHES MAXIMUM |
AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
AASU | HEAD HEIGHT | 0.400 INCHES NOMINAL |
AATB | WIDTH BETWEEN FLATS | 1.099 INCHES MINIMUM AND 1.107 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
ANEE | GRIP LENGTH | 2.678 INCHES MINIMUM AND 2.698 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 16 |
CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.125 INCHES MINIMUM ALL HOLES AND 3.155 INCHES MAXIMUM ALL HOLES |
MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload