Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 543-00HS-102 | Alternate P/N : 54300HS102 | Manufacturer : vamistor corp |
| Item Name: resistor variable wire wound non | NSN: 5905-00-138-9596 (5905001389596) | CAGE Code: 0EBU2 |
If you require part number 543-00HS-102 from Vamistor Corp which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 543-00HS-102 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905001389596 and was produced under the CAGE Code 0EBU2. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 543-00HS-102 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-138-9596 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 001389596 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 428529-7 | 1 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 0.420 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.035 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.416 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions