Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : DNT-23-072 | Alternate P/N : DNT23072 | Manufacturer : veeco instruments inc |
| Item Name: resistor variable nonwire wound | NSN: 5905-01-107-6580 (5905011076580) | CAGE Code: 80103 |
| FSC: 5905 Resistors |
If you require part number DNT-23-072 from Veeco Instruments Inc which is described as a Resistor Variable Nonwire Wound component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number DNT-23-072 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905011076580 and was produced under the CAGE Code 80103. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part DNT-23-072 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-107-6580 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 011076580 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 460-3291 | 1 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 0.039 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 23.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | BEARING |
| FEAT | SPECIAL FEATURES | SEALED |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions