| Part No. : 8295-710-101 | Alternate P/N : 8295710101 | Manufacturer : veeco instruments inc |
| Item Name: lead set test | NSN: 6625-01-372-1149 (6625013721149) | CAGE Code: 00124 |
If you require part number 8295-710-101 from Veeco Instruments Inc which is described as a Lead Set Test component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 8295-710-101 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 6625013721149 and was produced under the CAGE Code 00124. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 8295-710-101 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| AYDS | END ITEM NAME | MICRO-OMMETER NSN 6625-01-195-7513 |
| FEAT | SPECIAL FEATURES | PROBE, TEST, 4 WIRE, CURRENT SOURCE HI AND LO, VOLTAGE SENSE HI AND LO,OPERATING TEMP 0/50 DEG C. |
| AJKE | END ITEM SOURCE | 1W025 |
| FTLD | III FUNCTIONAL DESCRIPTION | FACILLITATE RESISTIVE MEASUREMENT OF CONDUCTIVE AIRCRAFT SURFACE MATERIALS WITH RESISTIVITIES OF LESS THAN ONE OHM PER SQUARE, AND UP TO 2400 OHMS PER SQUARE. THE TEST PROBE SHALL OPERATE OVER A RANGE OF 200 MILLIOHMS TO 200 KILOOHMS, PRESSURE RANGE OF 40-70 GRAMS PER TIP, TIP RADII OF 10 MIL, WITH A 62 MIL SPACING. CONTAINS A NORMALLY OPEN TEST SWITCH. WEIGHT 8 OZ, 2.5 INCH DIA. AND 6 INCH LENGTH, WITH AT LEAST A 6 TOOT CORD |
| AGAV | END ITEM IDENTIFICATION | PACER SPECIAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload