Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 600-00-10K | Alternate P/N : 6000010K | Manufacturer : vernitron corp |
| Item Name: resistor variable wire wound non | NSN: 5905-01-258-0604 (5905012580604) | CAGE Code: 84048 |
If you require part number 600-00-10K from Vernitron Corp which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 600-00-10K which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905012580604 and was produced under the CAGE Code 84048. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 600-00-10K today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-258-0604 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 012580604 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 0303514 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.265 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions