Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : EGS-1-1 100 OHMS 1PCT | Alternate P/N : EGS11100OHMS1PCT | Manufacturer : vishay dale electronics inc |
| Item Name: resistor fixed wire wound induct | NSN: 5905-00-137-4044 (5905001374044) | CAGE Code: 91637 |
| FSC: 5905 Resistors |
If you require part number EGS-1-1 100 OHMS 1PCT from Vishay Dale Electronics Inc which is described as a Resistor Fixed Wire Wound Induct component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number EGS-1-1 100 OHMS 1PCT which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905001374044 and was produced under the CAGE Code 91637. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part EGS-1-1 100 OHMS 1PCT today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-137-4044 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND | 5905 | 001374044 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AL257SM193 | B | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 |
| AAPP | ELECTRICAL RESISTANCE | 100.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 |
| ABJT | TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 0.065 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 1.000 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CBME | CUBIC MEASURE | 0.002 CUBIC INCHES |
| CSCF | TERMINAL TYPE | WIRE LEAD |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| TEST | TEST DATA DOCUMENT | 94756-443-1586 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions