Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : HLM-10-10Z .1 OHM 5 | Alternate P/N : HLM1010Z1OHM5 | Manufacturer : vishay dale electronics inc |
| Item Name: resistor fixed wire wound induct | NSN: 5905-00-162-9563 (5905001629563) | CAGE Code: 91637 |
| FSC: 5905 Resistors |
If you require part number HLM-10-10Z .1 OHM 5 from Vishay Dale Electronics Inc which is described as a Resistor Fixed Wire Wound Induct component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HLM-10-10Z .1 OHM 5 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905001629563 and was produced under the CAGE Code 91637. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HLM-10-10Z .1 OHM 5 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-162-9563 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND | 5905 | 001629563 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M9-119 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| AAPP | ELECTRICAL RESISTANCE | 0.100 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 350.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.188 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.750 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.375 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.000 INCHES NOMINAL |
| AEFB | POWER DISSIPATION RATING IN WATTS | 10.000 HEAT SINK |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| BYML | MOUNTING HOLE SIZE | 0.126 INCHES NOMINAL |
| CBME | CUBIC MEASURE | 0.624 CUBIC INCHES |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| STYL | STYLE DESIGNATOR | TERMINALS ONE EDGE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions