Part No. : LD111-0026-0521 | Alternate P/N : LD11100260521 | Manufacturer : volumatic inc |
Item Name: bolt close tolerance | NSN: 5306-01-180-9107 (5306011809107) | CAGE Code: 1P642 |
FSC: 5306 Bolts |
If you require part number LD111-0026-0521 from Volumatic Inc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number LD111-0026-0521 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306011809107 and was produced under the CAGE Code 1P642. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part LD111-0026-0521 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. LD111-0026-0521
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-01-180-9107 Item Description: Bolt Close Tolerance | 5306 | 011809107 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ld111-0026-0521 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
CLOSE TOLERANCE | AAJD | THREAD CLASS3A |
CLOSE TOLERANCE | AAJF | THREAD DIRECTIONRIGHT-HAND |
CLOSE TOLERANCE | AASA | THREAD LENGTH0 442 INCHES MINIMUM AND 0 492 INCHES MAXIMUM |
CLOSE TOLERANCE | AASB | FASTENER LENGTH1 764 INCHES MINIMUM AND 1 794 INCHES MAXIMUM |
CLOSE TOLERANCE | AASK | HEAD STYLEDOUBLE HEXAGON |
CLOSE TOLERANCE | AASU | HEAD HEIGHT0 177 INCHES MINIMUM AND 0 197 INCHES MAXIMUM |
CLOSE TOLERANCE | AATB | WIDTH BETWEEN FLATS0 492 INCHES MINIMUM AND 0 502 INCHES MAXIMUM |
CLOSE TOLERANCE | AAUR | GRIP DIAMETER0 3115 INCHES MINIMUM AND 0 3120 INCHES MAXIMUM |
CLOSE TOLERANCE | AHYM | NOMINAL THREAD DIAMETER0 312 INCHES |
CLOSE TOLERANCE | ANEE | GRIP LENGTH1 302 INCHES MINIMUM AND 1 322 INCHES MAXIMUM |
CLOSE TOLERANCE | CMLP | THREAD QUANTITY PER INCH24 |
CLOSE TOLERANCE | CQFM | HARDNESS RATING46 0 ROCKWELL C MINIMUM OVERALL AND 50 0 ROCKWELL C MAXIMUM OVERALL |
CLOSE TOLERANCE | MATT | MATERIALSTEEL COMP XM-13 OVERALL |
CLOSE TOLERANCE | MDCL | MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
CLOSE TOLERANCE | SFTT | SURFACE TREATMENTPASSIVATE OVERALL |
CLOSE TOLERANCE | STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
CLOSE TOLERANCE | THSD | THREAD SERIES DESIGNATORUNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload