Part No. : NAS1102E06-5 | Alternate P/N : NAS1102E065 | Manufacturer : wesco aircraft hardware corp |
Item Name: screw machine | NSN: 5305-00-213-8894 (5305002138894) | CAGE Code: 1V757 |
FSC: 5305 Screws |
If you require part number NAS1102E06-5 from Wesco Aircraft Hardware Corp which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1102E06-5 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305002138894 and was produced under the CAGE Code 1V757. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1102E06-5 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1102E06-5
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-213-8894 Item Description: Screw Machine | 5305 | 002138894 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Nas1102e06-5 | 2 | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
MACHINE | AAJD | THREAD CLASS3A |
MACHINE | AAJF | THREAD DIRECTIONRIGHT-HAND |
MACHINE | AASA | THREAD LENGTH0 162 INCHES MINIMUM AND 0 255 INCHES MAXIMUM |
MACHINE | AASB | FASTENER LENGTH0 282 INCHES MINIMUM AND 0 312 INCHES MAXIMUM |
MACHINE | AASK | HEAD STYLEFLAT COUNTERSUNK |
MACHINE | AASL | HEAD DIAMETER0 231 INCHES MINIMUM AND 0 279 INCHES MAXIMUM |
MACHINE | ABQZ | INTERNAL DRIVE STYLETORQUE SET |
MACHINE | AHYM | NOMINAL THREAD DIAMETER0 138 INCHES |
MACHINE | CMLP | THREAD QUANTITY PER INCH32 |
MACHINE | CQBC | MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH |
MACHINE | CRSQ | COUNTERSINK ANGLE99 0 DEGREES MINIMUM AND 101 0 DEGREES MAXIMUM |
MACHINE | CYAU | SCREW MATERIALIRON ALLOY 660 |
MACHINE | CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737 ASSN STD SINGLE MATERIAL RESPONSE |
MACHINE | CYBA | SCREW SURFACE TREATMENTPASSIVATE |
MACHINE | CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
MACHINE | THSD | THREAD SERIES DESIGNATORUNJC |
MACHINE | ZZZK | SPECIFICATIONSTANDARD DATA80205-NAS1102 PROFESSIONALINDUSTRIAL ASSOCIATION STANDARD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload