Part No. : 396105 | Manufacturer : white motor corp | Item Name: bolt machine |
NSN: 5306-00-350-6454 (5306003506454) | CAGE Code: 65282 | FSC: 5306 Bolts |
If you require part number 396105 from White Motor Corp which is described as a Bolt Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 396105 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306003506454 and was produced under the CAGE Code 65282. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 396105 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 396105
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-00-350-6454 Item Description: BOLT,MACHINE | 5306 | 003506454 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
396105 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 4.625 INCHES NOMINAL |
AASK | HEAD STYLE | HEXAGON |
AASU | HEAD HEIGHT | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
AATB | WIDTH BETWEEN FLATS | 1.500 INCHES NOMINAL |
AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.140 INCHES NOMINAL FIRST HOLE |
AHYM | NOMINAL THREAD DIAMETER | 1.000 INCHES |
CBBL | FEATURES PROVIDED | FINISHED HEAD |
CMLP | THREAD QUANTITY PER INCH | 14 |
CQFM | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 4.500 INCHES NOMINAL FIRST HOLE |
FEAT | SPECIAL FEATURES | UNDERCUT 0.562 IN.W BY 0.140 IN. DEEP AT 4.063 IN. FROM LARGEST BEARING SURFACE OF HEAD; DRILL 2 HOLES 90 DEG APART,THREAD END |
MATT | MATERIAL | STEEL OVERALL OR STEEL COMP 8630 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,8730 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-S-624 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload