Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 410001-17-NSI | Alternate P/N : 41000117NSI | Manufacturer : windham lifts inc |
| Item Name: hose assembly nonmetallic | NSN: 4720-01-386-3299 (4720013863299) | CAGE Code: 62080 |
| FSC: 4720 Hose and Tubing Flexible |
If you require part number 410001-17-NSI from Windham Lifts Inc which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 410001-17-NSI which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720013863299 and was produced under the CAGE Code 62080. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 410001-17-NSI today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-386-3299 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013863299 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 410001-17-NSI | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 1ST LAYER BRAIDED STEEL WIRE 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CRXX | MEASURING METHOD AND LENGTH | 13.000 INCHES NOMINAL WORKING |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC CARRIAGE SWIVEL TO SIDE SHIFT CYLINDER |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CBBL | FEATURES PROVIDED | NONSKIVE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ZZZK | SPECIFICATION/STANDARD DATA | SAE J517,100R2,TYPE AT-81343 NATIONAL STD/SPEC |
| AAJD | THREAD CLASS | 3B 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions