Part No. : GD95A | Manufacturer : wisconsin motors llc | Item Name: gear helical |
NSN: 3020-00-249-9902 (3020002499902) | CAGE Code: 66289 | FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number GD95A from Wisconsin Motors Llc which is described as a Gear Helical component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number GD95A which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020002499902 and was produced under the CAGE Code 66289. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part GD95A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. GD95A
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-00-249-9902 Item Description: Gear Helical | 3020 | 002499902 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Gd95a | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | WEBBED, OFFSET, SOLID |
AGJS | PITCH DIAMETER | 2.5310 INCHES NOMINAL |
AJLA | TEETH QUANTITY | 24 |
ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
CWCD | NOMINAL OUTSIDE DIAMETER | 2.7285 INCHES |
CWMW | TEETH TYPE | SINGLE HELIX |
CWNH | TOOTH FORM | STANDARD |
CWNM | TOOTH DIRECTION | LEFT |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
CWPZ | HELIX ANGLE | 18.7665 DEGREES |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.056 INCHES FIRST END |
CWRM | FACE NOMINAL WIDTH | 0.436 INCHES |
CWRS | BORE NOMINAL DIAMETER | 0.624 INCHES FIRST END |
CWSN | KEYWAY NOMINAL WIDTH | 0.1245 INCHES FIRST END |
CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.3774 INCHES FIRST END |
CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
CWTX | HUB NOMINAL DIAMETER | 0.8125 INCHES SECOND END |
MATT | III MATERIAL | STEEL OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE FLUSH HUB |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload