Part No. : F6-10-10 | Alternate P/N : F61010 | Manufacturer : bae systems information and electronic systems integration i |
Item Name: screw machine | NSN: 5305-00-912-4837 (5305009124837) | CAGE Code: 72314 |
FSC: 5305 Screws |
If you require part number F6-10-10 from Bae Systems Information And Electronic Systems Integration I which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number F6-10-10 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009124837 and was produced under the CAGE Code 72314. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part F6-10-10 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. F6-10-10
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-912-4837 Item Description: Screw Machine | 5305 | 009124837 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
F6-10-10 | 1 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
MACHINE | AAJD | THREAD CLASS2A |
MACHINE | AAJF | THREAD DIRECTIONRIGHT-HAND |
MACHINE | AASA | THREAD LENGTH0 563 INCHES MINIMUM AND 0 625 INCHES MAXIMUM |
MACHINE | AASB | FASTENER LENGTH0 625 INCHES NOMINAL |
MACHINE | AASK | HEAD STYLEFILLISTER |
MACHINE | AASL | HEAD DIAMETER0 292 INCHES MINIMUM AND 0 313 INCHES MAXIMUM |
MACHINE | AASU | HEAD HEIGHT0 123 INCHES MINIMUM AND 0 130 INCHES MAXIMUM |
MACHINE | AAUB | HOLE DIAMETER0 046 INCHES NOMINAL |
MACHINE | ABQZ | INTERNAL DRIVE STYLESLOT |
MACHINE | AHYM | NOMINAL THREAD DIAMETER0 190 INCHES |
MACHINE | ASXK | HOLE QUANTITY1 |
MACHINE | CMLP | THREAD QUANTITY PER INCH32 |
MACHINE | CQBC | MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH |
MACHINE | CYAU | SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
MACHINE | CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES |
MACHINE | CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
MACHINE | CYBG | HEAD HOLE CONFIGURATION STYLEROUND |
MACHINE | THSD | THREAD SERIES DESIGNATORUNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload