Part No. : F6-2-6L | Alternate P/N : F626L | Manufacturer : bae systems information and electronic systems integration i |
Item Name: screw machine | NSN: 5305-00-945-0502 (5305009450502) | CAGE Code: 72314 |
FSC: 5305 Screws |
If you require part number F6-2-6L from Bae Systems Information And Electronic Systems Integration I which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number F6-2-6L which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305009450502 and was produced under the CAGE Code 72314. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part F6-2-6L today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. F6-2-6L
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-945-0502 Item Description: Screw Machine | 5305 | 009450502 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
F6-2-6l | 2 | 1 | C | A |
MRC | Criteria | Characteristic |
---|---|---|
MACHINE | AAJD | THREAD CLASS2A |
MACHINE | AAJF | THREAD DIRECTIONRIGHT-HAND |
MACHINE | AASA | THREAD LENGTH0 339 INCHES MINIMUM AND 0 375 INCHES MAXIMUM |
MACHINE | AASB | FASTENER LENGTH0 375 INCHES NOMINAL |
MACHINE | AASK | HEAD STYLEFILLISTER |
MACHINE | AASL | HEAD DIAMETER0 124 INCHES MINIMUM AND 0 140 INCHES MAXIMUM |
MACHINE | AASU | HEAD HEIGHT0 055 INCHES MINIMUM AND 0 062 INCHES MAXIMUM |
MACHINE | AAUB | HOLE DIAMETER0 031 INCHES NOMINAL |
MACHINE | ABQZ | INTERNAL DRIVE STYLESLOT |
MACHINE | AHYM | NOMINAL THREAD DIAMETER0 086 INCHES |
MACHINE | ASXK | HOLE QUANTITY1 |
MACHINE | CMLP | THREAD QUANTITY PER INCH56 |
MACHINE | CQBC | MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH |
MACHINE | CYAU | SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
MACHINE | CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES |
MACHINE | CYBA | SCREW SURFACE TREATMENTPASSIVATE |
MACHINE | CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
MACHINE | CYBG | HEAD HOLE CONFIGURATION STYLEROUND |
MACHINE | THSD | THREAD SERIES DESIGNATORUNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload