Part No. : T8000730PC15 | Manufacturer : general electric company | Item Name: gear spur |
NSN: 3020-00-252-1178 (3020002521178) | CAGE Code: 24446 | FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number T8000730PC15 from General Electric Company which is described as a Gear Spur component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number T8000730PC15 which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020002521178 and was produced under the CAGE Code 24446. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part T8000730PC15 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. T8000730PC15
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-00-252-1178 Item Description: Gear Spur | 3020 | 002521178 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
T8000730pc15 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | PLAIN, SOLID |
AGJS | PITCH DIAMETER | 0.7490 INCHES MINIMUM AND 0.7495 INCHES MAXIMUM |
AJLA | TEETH QUANTITY | 24 |
ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
CWCD | NOMINAL OUTSIDE DIAMETER | 0.810 INCHES |
CWFR | NOMINAL OVERALL LENGTH | 0.594 INCHES |
CWNH | TOOTH FORM | STANDARD |
CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.438 INCHES FIRST END |
CWRM | FACE NOMINAL WIDTH | 0.156 INCHES |
CWRS | BORE NOMINAL DIAMETER | 0.373 INCHES BOTH ENDS |
CWSN | KEYWAY NOMINAL WIDTH | 0.094 INCHES BOTH ENDS |
CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.245 INCHES BOTH ENDS |
CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
CWTX | HUB NOMINAL DIAMETER | 0.625 INCHES FIRST END |
MATT | III MATERIAL | STEEL COMP 416 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-853,CLASS 6,TYPE A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | PROTRUDING HUB |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload