Part No. : T8000731PC8 | Manufacturer : general electric company | Item Name: gear spur |
NSN: 3020-00-444-4995 (3020004444995) | CAGE Code: 24446 | FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number T8000731PC8 from General Electric Company which is described as a Gear Spur component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number T8000731PC8 which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020004444995 and was produced under the CAGE Code 24446. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part T8000731PC8 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. T8000731PC8
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-00-444-4995 Item Description: Gear Spur | 3020 | 004444995 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
T8000731pc8 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | PLAIN, SOLID |
ABSA | SPLINE QUANTITY | 6 BOTH ENDS |
AGJS | PITCH DIAMETER | 2.4970 INCHES MINIMUM AND 2.4980 INCHES MAXIMUM |
AJLA | TEETH QUANTITY | 25 |
ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
CWCD | NOMINAL OUTSIDE DIAMETER | 2.697 INCHES |
CWNH | TOOTH FORM | STANDARD |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.594 INCHES FIRST END |
CWRM | FACE NOMINAL WIDTH | 0.656 INCHES |
CWRS | BORE NOMINAL DIAMETER | 0.8755 INCHES BOTH ENDS |
CWTB | COUNTERBORE NOMINAL DEPTH | 0.250 INCHES FIRST END |
CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
CWTX | HUB NOMINAL DIAMETER | 1.375 INCHES FIRST END |
FEAT | SPECIAL FEATURES | 1ST END CNTRBRD 0.891 IN. DIA AND 0.250 IN. DEEP |
MATT | III MATERIAL | STEEL COMP 4140 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 4140 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
STYL | STYLE DESIGNATOR | PROTRUDING HUB |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload