Part No. : HT271-3-10 | Alternate P/N : HT271310 | Manufacturer : hi shear corporation |
Item Name: screw close tolerance | NSN: 5305-01-238-2170 (5305012382170) | CAGE Code: 73197 |
FSC: 5305 Screws |
If you require part number HT271-3-10 from Hi Shear Corporation which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number HT271-3-10 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305012382170 and was produced under the CAGE Code 73197. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part HT271-3-10 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. HT271-3-10
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-238-2170 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 012382170 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
HT271-3-10 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 1.015 INCHES MINIMUM AND 1.062 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
AASL | HEAD DIAMETER | 0.376 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.439 INCHES MINIMUM AND 0.459 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |
CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES MAXIMUM |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
MATT | MATERIAL | TITANIUM ALLOY OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload